Complete Tutorial for Installing a New Shower Unit

Get A Free Estimate

Have you been searching for resources around Simple ways to Install a Shower Cubicle on Your Own?

An effective shower setup requires careful preparation and also a lot of work. Most of the times, you will certainly require to do 3 types of jobs: mounting wall surfaces, installing the plumbing, and finishing wall surfaces.

Preparation

Firstly, you must select the kind of shower that you wish to mount. It is essential to identify whether the chosen shower is capable of handling particular systems and can regulate a safe degree of water through the boiler. A lot of shower systems nowadays are developed to be adaptable to different water stress (such as stored warm water and cool mains).
It is also important to consider the water stress and the preparation of the piping and also drainage for the shower

Different Sorts Of Shower Units

Push-on Mixer: The pipe as well as spray parts of the push-on mixer shower system can be attached to the bath faucet as per your requirement, as well as the water temperature level can be adjusted via the taps. Push-on mixers are cheap and exceptionally easy to install. Nevertheless, although the pipe connection is simple, it is conveniently removed. Additionally, it is troublesome to change the temperature level.

Bath/Shower Mixer: The tube and spray of this type of shower are incorporated with a bathroom mixer faucet, and also the temperature can be adjusted via the bath taps. It is a very inexpensive choice and no additional plumbing is included. However, the bath/shower mixers likewise suffer from troublesome temperature control options.

Guidebook Mixer: The pipe and also spray of a hands-on mixer shower unit belong of the wall surface system and the cold and hot water materials are linked to a single shutoff The temperature level and also stress of the water are regulated via either one or a variety of handles (in more pricey showers). Although temperature control is much easier in hand-operated mixer types, they are more costly than the formerly mentioned mixers. They additionally require added plumbing of cold and hot water system pipes.

Thermostatic Mixer: The pipe as well as spray of this shower type are a part of the wall surface system and also the cold and hot water supplies are linked to a single shutoff below also. It is full with a built-in stabiliser to self-adjust the water temperature level and to prevent it from becoming also hot. Among the largest advantages of a thermostatic mixer shower kind consists of hassle-free temperature level control. Nonetheless, it is the most expensive of the different mixer choices.

Power Shower: A power shower is a solitary device having a powerful electrical pump that is capable of altering both the water stress as well as temperature level. This kind of shower can be fitted if there is water supply from a cold water tank as well as a hot water cylinder. A power shower makes the change of both stress and temperature level very easy. On the other hand, it disagrees for water warmed straight by the shower or where the water is provided by a mix boiler under mains pressure.

Electric Shower: An electric shower is plumbed right into a mains cold water supply and also it warms the water electrically. It is important to keep in mind that for this shower kind to be set up, the mains stress needs to be at least 0.7 kg/sq cm (10lb/sq in). The device permits the temperature as well as stress to be readjusted by means of a handle. Versions with temperature stabilisers are much better as they continue to be untouched by other taps in other places in use within the home. A major disadvantage of electrical showers is that the control handle just allows for the option of high temperatures at much less stress, or reduced temperature levels at a greater pressure. This is troublesome in the winter season when the spray is typically weak and also the keys water is cooler. Nonetheless, this problem is tackled in some models which are available with a winter/summer setup.

Approach

Relying on the type of shower you wish to install, the shower head must either be fitted in order to avoid its contact with the water in the bathroom listed below or the base tray, or it needs to have a check valve.
Before starting, it is recommended to mark the positions of the shower head and control, and to plan the pipe-work involved. Furthermore, the drain system to eliminate the waste water will need to be intended. Both placements of the wire path as well as the shower button will certainly likewise need to be considered if an instantaneous or electrical shower device is being set up.
Utilize the guideline overview offered with the shower unit to fit the shower control.Before fitting the pipelines that will supply the water to the shower system, it is essential to cut off the water supply. In order to shield the pipes, they should be offered a water resistant covering and additionally fitted with separating valves. The pipelines can then be buried into the wall surface and also glued over to neaten the overall appearance.
Fit the base tray, shower head, and installations.
Link the main shower control to the pipelines that will be providing the water (This may call for a female screw string adapter).
Reconnect the water system and examination the pipes for any kind of leakages, as some may require firm.
If you are mounting an electrical shower, remember to turn off the electricity supply prior to making any type of electrical links. Once these links have been made (there should be advice within the instruction manual), the power supply can be switched over back on.

Adjusting Water Stress to Suit Your Shower

The cold water reservoir can be lifted to a better height (occasionally as little as 150mm (6inches)) by installation a solid wood support underneath it - possibly composed of struts and also blockboards. If you choose this alternative, the main as well as circulation pipelines will certainly also need to be elevated to meet the brand-new elevation of the reservoir.
Additionally, a booster pump (a solitary pump or a dual/twin pump) can be fitted. Whichever kind is picked, it must be linked right into the power supply in order to run.

Piping and Drain

It is best to make use of 15mm size supply pipes, and also make the runs to the shower as short as well as straight as feasible so regarding keep maximum pressure as well as reduce warm loss. In addition, by reducing making use of elbows for pipe corners, you can reduce the resistance in the circulation of the water. You can achieve this by flexing the pipelines rather.

Most Typical Errors

Breaching or overlooking neighborhood code restrictions.

Using pipelines that are also tiny.

Affixing copper to galvanized without making use of a brass or dielectric suitable in between both.

Not making use of tape or pipeline substance at threaded joints.

Not leveling your fixtures when installing them.

Not installing an air gap filling for fixtures.

Reducing supply stub outs also brief to mount the shutoff valves onto after the completed wall is in place.

Not properly aligning tubes right into installations or stop valves. (Compeling the nut onto the compression ring at an angle when the tubes goes to an angle will trigger a leak.).

When turning the water back on in your house, constantly run the outside hose pipe shutoff or purge your bathrooms to bleed dust and also air from the lines. This particles can trigger problems in your sink taps and also various other plumbing trim.

Most Popular Shower Enclosure Options to Upgrade Your Bathroom

Frameless Shower Enclosures

Switching to a frameless shower enclosure can instantly add a modern feel to your bathroom. This type of shower enclosure eliminates the visual obstruction of frames, providing a seamless flow using fully customisable glass.

Since they are fully customisable, it fits all sizes and shapes of your bathroom space. You can also design it in a way suitable for an expansive spa shower.

In-line Shower Options

Another popular shower enclosure option you can use to upgrade your bathroom is an in-line shower. This type of shower installs a shower glass in-line with an adjacent wall, keeping water within the shower area.

You can have two options for in-line showers: hinged doors and sliding doors. An in-line shower with hinged doors allows you to have one glass shower door mounted on one side and open the door outwards. Meanwhile, in-line showers with sliding doors will enable you to save space but are more expensive.

Semi-Frameless Shower Enclosures

The semi-frameless shower enclosure is also an excellent shower enclosure option as it reduces the possibility of mould. Since the glass door is frameless, there’s no way soap and water will be stuck on it. But to ensure that there’s no way for mould to flourish in your bathroom, choose frameless shower enclosures instead.

Semi-frameless shower enclosures are the ideal choice if you adore the design of frameless showers but would prefer a more affordable solution. These types of shower enclosures have a range of options available by the glass manufacturing process in accordance with various height specifications.

You can also customise this type of shower enclosure. However, your options might be limited because of the standard sizes and heights.

Glass Block Shower Enclosure

If you don’t want a bathroom door and walk-in glass shower enclosures are not an option either, a glass block shower enclosure is for you. Glass blocks will allow your bathroom to access maximum daylight while having the privacy it offers. Also, glass block enclosures might require a bit more effort to clean than other enclosures, but they are durable and versatile options.

You can also be creative when using glass blocks for your bathroom. Since this type of shower enclosure is made of small glass blocks, you can easily create a unique shower enclosure shape. There are many options for thickness, styles, and colours, too.

Final Thoughts

Upgrading your bathroom with a new shower enclosure is a great way to add value to your home. Not only will it appear nice, but it will also be more functional and efficient. When choosing a shower enclosure, pick one that fits the style of your bathroom and your budget. It’s also paramount to take note of the pros and cons of each type before installation to ensure you don’t miss anything important.

https://gharpedia.com/blog/shower-enclosure-to-upgrade-bathroom/

Hopefully you enjoyed reading our article on How to Build a Shower Enclosure for Your DIY Bathroom. Many thanks for taking the time to read through our piece. Don't hesitate to set aside a second to promote this write-up if you enjoyed reading it. I truly appreciate reading our article about How to Install a One-Piece Shower Unit.

Click Here